?
Solved

AIX nfs subsystem unable to run

Posted on 2008-06-13
15
Medium Priority
?
8,590 Views
Last Modified: 2013-11-17
hi i'm running AIX 5.1 ML 4

The problem is ...

i tried to activate nfs

To start the nfs group, i type

# startsrc -g nfs

nfsd, biod,rpc.statd,rpc.lockd showing ALL STARTED WITH PROCESS ID.

but then when i type to check status #lssrc -g nfs

showing that only nfsd,biod that are running ...

but subsystems below are failed to run (inoperative status)


 rpc.statd                              inoperative
 rpc.lockd                              inoperative
 rpc.mountd                          inoperative

There is no error message coming out. so i have no idea why the subsystems were stopped.

Any guru can tell what's the problem and how to make rpc.statd,rpc.lockd,rpc.mountd able to be running.


Thank you very much.
0
Comment
Question by:nakbijak895
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 6
  • 5
15 Comments
 
LVL 62

Expert Comment

by:gheist
ID: 21780301
Those activate when you export some directory.
0
 

Author Comment

by:nakbijak895
ID: 21780403
Here what i have gotten :-

LOCDEV(root)/> mount loc2:/perl /test
mount: 1831-010 server loc2 not responding: RPC: 1832-019 Program not registered
mount: retrying
loc2:/perl

LOCDEV(root)/> lssrc -g nfs
Subsystem         Group            PID     Status
 biod             nfs              417898   active
 nfsd             nfs              426096   active
 rpc.statd        nfs                      inoperative
 rpc.lockd        nfs                      inoperative
 rpc.mountd       nfs                      inoperative

LABEL:          SRC_TRYX
IDENTIFIER:     1BA7DF4E

Date/Time:       Fri Jun 13 22:12:14 2008
Sequence Number: 129113
Machine Id:      005A7D8D4C00
Node Id:         LOCDEV
Class:           S
Type:            PERM
Resource Name:   SRC

Description
SOFTWARE PROGRAM ERROR

Probable Causes
APPLICATION PROGRAM

Failure Causes
SOFTWARE PROGRAM

        Recommended Actions
        DETERMINE WHY SUBSYSTEM CANNOT RESTART

Detail Data
SYMPTOM CODE
         256
SOFTWARE ERROR CODE
       -9020
ERROR CODE
           0
DETECTING MODULE
'srchevn.c'@line:'327'
FAILING MODULE
rpc.statd
---------------------------------------------------------------------------
LABEL:          SRC_TRYX
IDENTIFIER:     1BA7DF4E

Date/Time:       Fri Jun 13 22:12:11 2008
Sequence Number: 129110
Machine Id:      005A7D8D4C00
Node Id:         LOCDEV
Class:           S
Type:            PERM
Resource Name:   SRC

Description
SOFTWARE PROGRAM ERROR

Probable Causes
APPLICATION PROGRAM

Failure Causes
SOFTWARE PROGRAM

        Recommended Actions
        DETERMINE WHY SUBSYSTEM CANNOT RESTART

Detail Data
SYMPTOM CODE
         256
SOFTWARE ERROR CODE
       -9020
ERROR CODE
           0
DETECTING MODULE
'srchevn.c'@line:'327'
FAILING MODULE
rpc.mountd
LOCDEV(root)/> errpt -a -j 1BA7DF4E |pg
---------------------------------------------------------------------------
LABEL:          SRC_TRYX
IDENTIFIER:     1BA7DF4E

Date/Time:       Sat Jun 14 00:23:22 2008
Sequence Number: 129150
Machine Id:      005A7D8D4C00
Node Id:         LOCDEV
Class:           S
Type:            PERM
Resource Name:   SRC

Description
SOFTWARE PROGRAM ERROR

Probable Causes
APPLICATION PROGRAM

Failure Causes
SOFTWARE PROGRAM

        Recommended Actions
        DETERMINE WHY SUBSYSTEM CANNOT RESTART

Detail Data
SYMPTOM CODE
         256
SOFTWARE ERROR CODE
       -9020
ERROR CODE
           0
DETECTING MODULE
'srchevn.c'@line:'327'
FAILING MODULE
rpc.lockd
0
 
LVL 14

Expert Comment

by:sjm_ee
ID: 21781822
Is portmap running? Use "lssrc -s portmap" to see.
0
Get real performance insights from real users

Key features:
- Total Pages Views and Load times
- Top Pages Viewed and Load Times
- Real Time Site Page Build Performance
- Users’ Browser and Platform Performance
- Geographic User Breakdown
- And more

 

Author Comment

by:nakbijak895
ID: 21784380
yes .. portmap is running ...

What else other possible ?
0
 
LVL 62

Expert Comment

by:gheist
ID: 21786418
Type rpcinfo -p
if you get nfsd and mountd running your NFS is functional. Try mount from some other system.
0
 

Author Comment

by:nakbijak895
ID: 21787871
loc1 = master server
loc2 = client server

loc2(root)/> rpcinfo -p loc1
   program vers proto   port  service
    100000    4   tcp    111  portmapper
    100000    3   tcp    111  portmapper
    100000    2   tcp    111  portmapper
    100000    4   udp    111  portmapper
    100000    3   udp    111  portmapper
    100000    2   udp    111  portmapper
    100068    2   udp  42769  cmsd
    100068    3   udp  42769  cmsd
    100068    4   udp  42769  cmsd
    100068    5   udp  42769  cmsd
    100083    1   tcp  42769  ttdbserver
    100003    2   udp   2049  nfs
    100003    3   udp   2049  nfs
    100003    2   tcp   2049  nfs
    100003    3   tcp   2049  nfs
    200006    1   udp   2049
    200006    1   tcp   2049
    100005    1   udp  42780  mountd
    100005    2   udp  42780  mountd
    100005    3   udp  42780  mountd
    100005    1   tcp  42773  mountd
    100005    2   tcp  42773  mountd
    100005    3   tcp  42773  mountd
    100024    1   tcp  42775  status
    100024    1   udp  42793  status
    100133    1   tcp  42775
    100133    1   udp  42793
    200001    1   tcp  42775
    200001    1   udp  42793
    200001    2   tcp  42775
    200001    2   udp  42793
    100021    1   udp  42818  nlockmgr
    100021    2   udp  42818  nlockmgr
    100021    3   udp  42818  nlockmgr
    100021    4   udp  42818  nlockmgr
    100021    1   tcp  42777  nlockmgr
    100021    2   tcp  42777  nlockmgr
    100021    3   tcp  42777  nlockmgr
    100021    4   tcp  42777  nlockmgr


loc1(root)/> rpcinfo -p loc2
   program vers proto   port  service
    100000    4   tcp    111  portmapper
    100000    3   tcp    111  portmapper
    100000    2   tcp    111  portmapper
    100000    4   udp    111  portmapper
    100000    3   udp    111  portmapper
    100000    2   udp    111  portmapper
    100068    2   udp  42768  cmsd
    100068    3   udp  42768  cmsd
    100068    4   udp  42768  cmsd
    100068    5   udp  42768  cmsd
    100083    1   tcp  42768  ttdbserver
0
 
LVL 62

Expert Comment

by:gheist
ID: 21788552
Server says they are up and running.
0
 

Author Comment

by:nakbijak895
ID: 21790435
yes but still the subsystem below failed to run.

rpc.statd                              inoperative
 rpc.lockd                              inoperative
 rpc.mountd                          inoperative
0
 

Accepted Solution

by:
nakbijak895 earned 0 total points
ID: 21790488
solution found.

This is because the server A that required to mount server B is running 64 bit and Server B is running 32 bit.

After downgrade server A from 64bit  to 32bit. It successful running.


Thank you very much.

0
 
LVL 62

Expert Comment

by:gheist
ID: 21797442
I get them inoperative and mounting on 64bit AIX.
0
 
LVL 62

Expert Comment

by:gheist
ID: 21797491
i.e "inoperative" AIX server allows Linux, 32/64 AIX clients, FreeBSD clients and wvwn SFU clients.
0
 
LVL 62

Expert Comment

by:gheist
ID: 21832698
Those are on-demand started by inetd. "inoperable" display is because inetd was not restarted. Then again one installs 2-bit system rebooting 10 times and says it is completely different.

lockd/statd do not cause problems unless multiple users co-edit same files or you have weak network links.

0

Featured Post

Optimize your web performance

What's in the eBook?
- Full list of reasons for poor performance
- Ultimate measures to speed things up
- Primary web monitoring types
- KPIs you should be monitoring in order to increase your ROI

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Attention: This article will no longer be maintained. If you have any questions, please feel free to mail me. jgh@FreeBSD.org Please see http://www.freebsd.org/doc/en_US.ISO8859-1/articles/freebsd-update-server/ for the updated article. It is avail…
Installing FreeBSD… FreeBSD is a darling of an operating system. The stability and usability make it a clear choice for servers and desktops (for the cunning). Savvy?  The Ports collection makes available every popular FOSS application and packag…
Learn how to navigate the file tree with the shell. Use pwd to print the current working directory: Use ls to list a directory's contents: Use cd to change to a new directory: Use wildcards instead of typing out long directory names: Use ../ to move…
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.
Suggested Courses

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question