Solved

Assigning static IPs via RADIUS through PIX 506e

Posted on 2008-06-13
2
239 Views
Last Modified: 2010-04-09
I have a number of remote users who connect to a PIX 515, which doles out static IPs per user, based on their Active Directory user attributes.  This is done through Microsoft IAS / RADIUS.

I would like to configure a PIX 506e device as a backup, but I cannot seem to find a way to configure it to assign IPs based on RADIUS attributes returned from the IAS servers.  It seems to want to use an address pool local to the PIX.  Does anyone know if it's possible to configure the 506e to assign static IPs based on the authenticating RADIUS server?

The PIX 506e is running software 6.3(5).  The PIX 515e is running 8.0(3).  Thanks!
0
Comment
Question by:sloth10k
2 Comments
 
LVL 16

Expert Comment

by:btassure
ID: 21783422
Can you post the configs of the 515 and the 506 please?
0
 

Accepted Solution

by:
sloth10k earned 0 total points
ID: 21878968
According to Cisco, this cannot be done using version 6.0 on the 506.  The 506 cannot be upgraded to version 7.0.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Some of you may have heard that SonicWALL has finally released an app for iOS devices giving us long awaited connectivity for our iPhone's, iPod's, and iPad's. This guide is just a quick rundown on how to get up and running quickly using the app. …
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

838 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question