Solved

linux, Fedora, core 4

Posted on 2008-06-14
5
256 Views
Last Modified: 2013-12-16
How to automount a usd harddisk?

I have mounted an usb harddisk but When the system is reboot, I mounted it again manually.

Where is the procedure?

Serkan
0
Comment
Question by:serkanakyol
  • 2
5 Comments
 
LVL 2

Accepted Solution

by:
brian_chamberlain earned 50 total points
ID: 21786317


find out what your drive is currently mounted as

if you type df -h it will give you a list of drives.

You will see something like dev/sdax  1G xx 12% /mnt/usb

The open terminal
sudo nano /etc/fstab

Insert the following line
/dev/sdax /mnt/XXX auto noauto,owner,kuzu 0 0

where sdax is what you see at the start of the df-h and XXX is what the drive is currently mounted as , the /mnt/usb bit.

0
 
LVL 2

Expert Comment

by:brian_chamberlain
ID: 21939876
Hi Rindi,

There is only one answer and it's the correct one!

Brian
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Introduction We as admins face situation where we need to redirect websites to another. This may be required as a part of an upgrade keeping the old URL but website should be served from new URL. This document would brief you on different ways ca…
I. Introduction There's an interesting discussion going on now in an Experts Exchange Group — Attachments with no extension (http://www.experts-exchange.com/discussions/210281/Attachments-with-no-extension.html). This reminded me of questions tha…
Learn how to get help with Linux/Unix bash shell commands. Use help to read help documents for built in bash shell commands.: Use man to interface with the online reference manuals for shell commands.: Use man to search man pages for unknown command…
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question