Solved

Custome Resolution for lcd

Posted on 2008-06-15
4
878 Views
Last Modified: 2013-11-08
PC configuration
ANTEC SONATA III 500
ASUS M3A78-EH
AMD X2 5600+
4GB DDR2 800
ASUS EN9600GT Driver Version. 6.14.11.7116
Seagate 32GB SATA
ASUS DVD-RX 20X
LG 22" L226W

Ok so, my monitor was connected using normal VGA cable before & I could see resolutions like 1280 X 768
1280 X 720 etc.
I just connected using DVI cable & resolution automatically changed from 1280 X 768 to 1680 X 1050 which is the native resolution of the monitor.
At this resolution things become so small that you can not read anything comfortably.
Now, my pc is not showing any 16:10 or 16:9 resolutions other than the native resolution.
I prefer to have 1280 X 768 or 1280 X720. Things are readable at this resolution & clarity is not compromised either.
When I go to NVIDIA control to Manage custom resolutions, it will always fail the test & without testing you can not apply the resolution.

0
Comment
Question by:jatin_sadana
  • 2
4 Comments
 
LVL 88

Expert Comment

by:rindi
ID: 21788459
What OS are you using? Under XP if you right Click an empty desktop space, then select Properties, Settings, then Advanced on the general Tab you can select large (120) dpi settings, and on the Appearance Tab under Font size you can select large or even extra large fonts. Vista will have similar settings. Like that you can use the correct resolution and will still be able to read things.
0
 

Author Comment

by:jatin_sadana
ID: 21788700
Yup, XP.
I have already done that.
It helps a little but it also creates a little problem in some applications for e.g. in Yahoo messenger, It starts automatically with windows (which is fine), when I click on close button or try to move its window, it will not work. So, I have to exit it from system tray but after that it works fine.

Also, I already have increased fonts size to large but it does not increase font size in all applications.
So, I am really interested in changing resolution only.
0
 
LVL 69

Expert Comment

by:Callandor
ID: 21792837
I would suggest PowerStrip, which will let you set up permanent custom resolutions: http://entechtaiwan.net/util/ps.shtm
0
 

Accepted Solution

by:
jatin_sadana earned 0 total points
ID: 21792927
I found the solution. You need to change Auto to GTF inadvanced settings &then any resolution works.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Introduction: When a connection to the internet is established, there always exists a modem between the connected device and the ISP (Internet Service Provider). The Operating System (OS) on your PC controls the modem which communicates with the …
System overheating may become a serious problem if not taken care of at the proper time. I am writing this article because I faced a similar problem. Intro All electronic devices produce heat, but computers are a special case - the processors bo…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …
Microsoft Active Directory, the widely used IT infrastructure, is known for its high risk of credential theft. The best way to test your Active Directory’s vulnerabilities to pass-the-ticket, pass-the-hash, privilege escalation, and malware attacks …

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question