Solved

How to assign a static route to WAP's?

Posted on 2008-06-16
3
646 Views
Last Modified: 2013-12-21
I recently setup four aironet 1300 access points for a local company to connect four different buildings.  These were to be setup in a sequetial chain and the association goes from the first to the second just fine, however from there numbers three and four both associate back to number two and no internet traffic passes beyond the second one and the last one in line (number 4) drops out every once in awhile.  So my question is, is there a way of setting a static route for all or some of the WAPs and could that be what's not allowing internet traffic to pass? I drew up a little thing as visual aid just in case I lost you.
AP-topology.bmp
0
Comment
Question by:lach203
3 Comments
 
LVL 5

Accepted Solution

by:
rslqld earned 500 total points
ID: 21819473
ip route 0.0.0.0 <ip of ideal node> interface
0
 

Author Comment

by:lach203
ID: 21822120
Command Line Interface, it's been a while. Okay, I'll give that a shot. Thanks.
0

Featured Post

How to run any project with ease

Manage projects of all sizes how you want. Great for personal to-do lists, project milestones, team priorities and launch plans.
- Combine task lists, docs, spreadsheets, and chat in one
- View and edit from mobile/offline
- Cut down on emails

Join & Write a Comment

Suggested Solutions

This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now