STATIC NAT FOR SPECIFIC IP ADDESS

All,

I am trying to do static NAT for a spefic IP address.  I want following nat command static (Inside,Outside) 79.18.207.102 10.4.4.61 netmask 255.255.255.255 only applicable for a particular source IP address.

Please give some inputs...
AlliantTechAsked:
Who is Participating?

Improve company productivity with a Business Account.Sign Up

x
 
MelaleucaConnect With a Mentor Commented:
There are two ways of doing this, you can either map an access list to the static nat command, or on your access group that you will apply to the interface you can limit the access list from a source ip address.

First option
static (Inside,Outside) 79.18.207.102 10.4.4.61 netmask 255.255.255.255 access-list (ACL)
Second option
access-list TO_FW<--FROM_OUTSIDE permit ip 4.4.0.0 255.255.0.0 interface outside
access-group TO_FW<--FROM_OUTSIDE in interface outside

0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.