Solved

Trying to image a pc running Server 2003 x64 RC2 and I get a blue screen.

Posted on 2008-06-17
7
496 Views
Last Modified: 2013-12-02
Trying to image a pc running Server 2003 x64 RC2 and I get a blue screen once the progress bar is loaded at boot up. I have mutliple servers running all the same hardware that have been imaged before. Only thing different is the OS which is 64bit. I'm using Ghost 11.5 with WinPE. Does ghost really care what OS you are using?
0
Comment
Question by:Xytras
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
7 Comments
 
LVL 28

Expert Comment

by:Michael Pfister
ID: 21810864
Can you see the details of the blue sceen (bug check code)?
0
 

Author Comment

by:Xytras
ID: 21812142
I found out that it will run the Linux bootable but no the WinPE it give me error like 0x00000005a. At first I noticed that the Plug and Play setting in BIOS was set to No, so setting it back to yes allowed it to boot to Linux but no luck with WinPE
0
 
LVL 28

Accepted Solution

by:
Michael Pfister earned 125 total points
ID: 21812282
Is this the first (left-most) hex-code you see?
0x0000005A: CRITICAL_SERVICE_FAILED
A critical service failed to initialize while starting the LastKnownGood control set.

I don't understand how this should happen when you start your boot disk.
Is the WinPE provided by Symantec? You could try creating a BartPE disk:

http://www.nu2.nu

0
 

Author Comment

by:Xytras
ID: 21814131
Currently using Ghost Solution 2.5 and using the Default WinPE it comes with. I have also tried Linux boot which works but I can not find the usb storage partition, probably because Linux doesn't read fat partition normally.
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I will show you HOW TO: Install VMware Tools for Windows on a VMware Windows virtual machine on a VMware vSphere Hypervisor 6.5 (ESXi 6.5) Host Server, using the VMware Host Client. The virtual machine has Windows Server 2016 instal…
In this article, I will show you HOW TO: Perform a Physical to Virtual (P2V) Conversion the easy way from a computer backup (image).
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question