Solved

Clear sh track counters?

Posted on 2008-06-17
2
2,011 Views
Last Modified: 2008-06-30
Hello All,

I have  question. I have objects tracking icmp echo requests. I recently changed the ip echo targets. How do I clear the counter ie uptime for the sh track command in IOS? Thank you.

                                                                                                                                                                                                Daniel Duarte
0
Comment
Question by:greenbeanx81
2 Comments
 
LVL 3

Accepted Solution

by:
shroomduck earned 125 total points
ID: 21806463
clear counters interface
0
 

Author Comment

by:greenbeanx81
ID: 21807073
Thank you. That clears the counters on the interface but I would like to clear the statistics on the show track command
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Port 808 is being blocked 9 122
ESXI home lab network setup (KISS) 12 182
Problem to router 7 71
ospf neighbors not coming up 6 59
It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

837 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question