?
Solved

SSO and OWA using Web SSL VPN

Posted on 2008-06-18
4
Medium Priority
?
3,439 Views
Last Modified: 2010-08-05
I have setup a bookmark to an internal OWA server.  I would like to have it use SSO so a user only has to log in once.  I am trying to figure out what POST Parameters to enter under the Advanced Options of the bookmark properties.  Here is what I have so far, but it is not working.

URL value: http://server/exchange
URL Method: Post
Enable favorite: Yes
Enable smart tunnel: No

Post Parameters:
username  CSCO_WEBVPN_USERNAME
password CSCO_WEBVPN_PASSWORD
Continue    Continue

I tried using http watch to see what it was doing, but I guess I am missing something.  When I try it, it just takes me to a login page.  If I then enter my credentials, I get a page cannot be found error.  I am still in the session though, I can click the home button and get back to my main page.  
0
Comment
Question by:kenbaker
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 32

Expert Comment

by:harbor235
ID: 21812527

I am not sure what you are trying to do here?

harbor235 ;}
0
 

Author Comment

by:kenbaker
ID: 21812808
I have a Cisco ASA 5505.  Web SSL VPN is setup on it so users can log in and access things on the internal network remotely.  One of those is OWA.  Right now they log into the ASA5505 and get a main page.  I have OWA setup as a webapp link or a bookmark.  A user can click on it, enter their user/pass again and get into OWA.  I want to use signal sign on so all they have to do is log into the ASA once and then when they click on the OWA bookmark it passes the information needed to log them in.  Does that clear things up?
0
 
LVL 32

Accepted Solution

by:
harbor235 earned 750 total points
ID: 21813227
Here is a doc for webvpn single sign on;

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/webvpn.html#wp1003053

Look under configuring WEBVPN

harbor235 ;}
0
 

Author Comment

by:kenbaker
ID: 21834226
harbor235

I was looking at that document when you posted it.  I am waiting to hear back from a couple users that are suppose to test it for me just to make sure.  If it works I will award you the points.  If not I post back.
0

Featured Post

Bringing Advanced Authentication to the SMB Market

WatchGuard announces the acquisition of advanced authentication provider, Datablink, with one mission – to bring secure authentication to SMB, mid-market, and distributed enterprises with a cloud-based solution, ideal for resale via their established channel & MSSP community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…
Suggested Courses

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question