Solved

Raid failure, Urgent

Posted on 2008-06-18
3
1,130 Views
Last Modified: 2013-11-14
heres one for the experts

we have a server with three disks that were actively in a raid 5 array, unfortunately the server appears to have died on us. We need to know if with the following information wether the Raid can be rebuilt or at the very least data pulled off of it.

again its an intel(r) storage console version 2.12  controlling the Raid

heres what i can see when i look at the drives. (see attached .txt file).

When i select repair on 0 which is the only drive option other than the missing hotfix i get the message ''Drive in error state cannot be repaired automatically! contact your sysAdmin or the customer support of the Intel corporation.''


Any help i will be very greatful/ any information required i can be reached on {email removed by Callandor}

Regards

Mike

insync-drive-properties.txt
0
Comment
Question by:eddiewickens
3 Comments
 
LVL 6

Accepted Solution

by:
Sh4d1 earned 500 total points
ID: 21812689
If you have two failed disk from 3 disk RAID5 it is big problem. You can restore data if one disk fail, but now it is almost not possible. Some company offers services for restoring broken raid, but its expensive.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Ever notice how you can't use a new drive in Windows without having Windows assigning a Disk Signature?  Ever have a signature collision problem (especially with Virtual Machines?)  This article is intended to help you understand what's going on and…
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now