?
Solved

Cisco ASA 5510 CPU usage monitoring w/ MRTG

Posted on 2008-06-19
4
Medium Priority
?
6,883 Views
Last Modified: 2008-06-19
Looking for the SNMP OID for CPU utilization on an ASA 5510.  I want to plug this in to MRTG so I can generate utilization graphs.
0
Comment
Question by:FWeston
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 15

Expert Comment

by:Voltz-dk
ID: 21824730
[root@localhost lib]# snmpwalk -v2c 192.168.0.1 1.3.6.1.4.1.9.9.109.1
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.2.1 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.3.1 = Gauge32: 8
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.4.1 = Gauge32: 13
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.5.1 = Gauge32: 13

---

"cpmCPUTotalPhysicalIndex"            "1.3.6.1.4.1.9.9.109.1.1.1.1.2"
"cpmCPUTotal5sec"            "1.3.6.1.4.1.9.9.109.1.1.1.1.3"
"cpmCPUTotal1min"            "1.3.6.1.4.1.9.9.109.1.1.1.1.4"
"cpmCPUTotal5min"            "1.3.6.1.4.1.9.9.109.1.1.1.1.5"

---

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml#snmptothepix
0
 
LVL 3

Author Comment

by:FWeston
ID: 21824916
Thanks.  When trying to use that value with MRTG I receive the following error.  Thoughts?

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.9.109.1.1.1.1.4)
0
 
LVL 15

Accepted Solution

by:
Voltz-dk earned 2000 total points
ID: 21825013
Well, the results I get from my own ASA got .1 postfixed to that.  Have you tried that?

1.3.6.1.4.1.9.9.109.1.1.1.1.4.1
0
 
LVL 3

Author Comment

by:FWeston
ID: 21825110
Perfect, thanks.
0

Featured Post

Get real performance insights from real users

Key features:
- Total Pages Views and Load times
- Top Pages Viewed and Load Times
- Real Time Site Page Build Performance
- Users’ Browser and Platform Performance
- Geographic User Breakdown
- And more

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
The DROP (Spamhaus Don't Route Or Peer List) is a small list of IP address ranges that have been stolen or hijacked from their rightful owners. The DROP list is not a DNS based list.  It is designed to be downloaded as a file, with primary intention…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
Sometimes it takes a new vantage point, apart from our everyday security practices, to truly see our Active Directory (AD) vulnerabilities. We get used to implementing the same techniques and checking the same areas for a breach. This pattern can re…
Suggested Courses
Course of the Month13 days, 17 hours left to enroll

801 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question