<div>
I'm going home - I meant run: ROUTE PRINT
</div>


I'm going home - I meant run: ROUTE PRINT

<div>
<div class="content wysiwyg-content">
On my network I used to use 1.1.200.5 for my default gateway via DHCP, that was changed to 1.1.200.3, these gateways are used to route to trusted domain on another network. &nbsp;All computers on my network routes fine except one.<br />
<br />
Even though in the network properties it shows the correct gateway when I do a tracert command to a machine on the other network it still tries to go through the old gateway.<br />
<br />
Ive tried deleting the gateway with netsh interface command which seemed successful but still it tries to go through the old gateway of 1.1.200.5.<br />
<br />
systems are windows 2003 (DHCP server domain controler)<br />
clients windows xp sp2<br />

</div>
</div>


On my network I used to use 1.1.200.5 for my default gateway via DHCP, that was changed to 1.1.200.3, these gateways are used to route to trusted domain on another network.  All computers on my network routes fine except one.

Even though in the network properties it shows the correct gateway when I do a tracert command to a machine on the other network it still tries to go through the old gateway.

Ive tried deleting the gateway with netsh interface command which seemed successful but still it tries to go through the old gateway of 1.1.200.5.

systems are windows 2003 (DHCP server domain controler)
clients windows xp sp2


I can't get one computer on my netway to route through the right gateway

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.

Networking

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).

DHCP

This topic area includes legacy versions of Windows prior to Windows 2000: Windows 3/3.1, Windows 95 and Windows 98, plus any other Windows-related versions including Windows Mobile.