Solved

Cisco 851 - DHCP Leases

Posted on 2008-06-19
2
664 Views
Last Modified: 2010-04-21
Is there a way (either via SDM or SSH/telnet) to view the DHCP leases?
Also.... can you create your own reservations witin the DHCP pool?

Thanks!
0
Comment
Question by:edalzell
2 Comments
 
LVL 16

Accepted Solution

by:
2PiFL earned 250 total points
ID: 21825827

From the enable prompt:
#sho dhcp lease

there is no way reserve addresses, but you can exclude a range to use for static ip's.

http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1000985

Here's the whole paper:

http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html
0
 

Author Closing Comment

by:edalzell
ID: 31468950
Thanks!
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
VoIP and Data on single switch, with SonicWall 6 71
Add Mac address reservation to Sonicwall TZ 210 router 1 62
New TWC modem/router breaks network 53 197
Home internet speed 20 30
While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question