Solved

Initial setup of PIX 515

Posted on 2008-06-20
2
285 Views
Last Modified: 2010-08-05
I'm trying to install a CIsco PIX 515E and have presumably missed something really fundametal
I can ping out using the outside interface and i can ping the inside one from my network but i cannot get out to the rest of the world from in my network can anyone help?
0
Comment
Question by:richardpaddon
2 Comments
 
LVL 16

Expert Comment

by:btassure
Comment Utility
Can you post the config please?
0
 

Accepted Solution

by:
richardpaddon earned 0 total points
Comment Utility
The rules are probably completely wrong now as i have been fiddleing for hours now

sh run
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto shutdown
interface ethernet3 auto shutdown
interface ethernet4 auto shutdown
interface ethernet5 auto shutdown
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security4
nameif ethernet3 intf3 security6
nameif ethernet4 intf4 security8
nameif ethernet5 intf5 security10
enable password Nlsns4f/xxVaYI7O encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name sevenkingshs
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
<--- More --->
             
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit tcp interface outside interface inside
access-list inside_access_in permit tcp interface inside interface outside
access-list outside_in permit icmp any any echo-reply
pager lines 24
mtu outside 1500
mtu inside 1500
mtu intf2 1500
mtu intf3 1500
mtu intf4 1500
mtu intf5 1500
ip address outside 10.201.216.13 255.255.252.0
ip address inside 192.168.1.254 255.255.0.0
no ip address intf2
no ip address intf3
no ip address intf4
<--- More --->
             
no ip address intf5
ip audit info action alarm
ip audit attack action alarm
no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
no failover ip address intf2
no failover ip address intf3
no failover ip address intf4
no failover ip address intf5
pdm location 10.201.216.2 255.255.255.255 outside
pdm location 10.201.216.3 255.255.255.255 outside
pdm location 192.168.1.0 255.255.255.0 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
static (outside,inside) 192.168.1.21 10.201.216.2 netmask 255.255.255.255 0 0
static (outside,inside) 192.168.1.11 10.201.216.3 netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 10.201.219.254 1
<--- More --->
             
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.200.2-192.168.200.254 inside
dhcpd lease 3600
<--- More --->
             
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:df0283b8a6dc24272cc0d2583641891c
: end

pixfirewall#
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

When I upgraded my ASA 8.2 to 8.3, I realized that my nonat statement was failing!   The log showed the following error:     %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows It was caused by the config upgrade, because t…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
This tutorial demonstrates a quick way of adding group price to multiple Magento products.

771 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now