?
Solved

Running out of IP's want to use two dhcp scopes to assign to printers

Posted on 2008-06-20
3
Medium Priority
?
381 Views
Last Modified: 2010-04-12
I have an IP of 10.25.110.128 255.255.255.128, and my switches are 10.1.2.10-19.  I want to assign my printers 10.1.2.20-30 through dhcp.  My dhcp is 10.25.110.128-255 and I want to use another scope to hand out reserved addess to printers 10.1.2.20-30
0
Comment
Question by:nelslarson
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 13

Accepted Solution

by:
TheCapedPlodder earned 2000 total points
ID: 21832240
Not a problem.

You can have as many DHCP scopes as you like on a MS DHCP server.

You will need to add an IP Helper for the 10.1.2.x VLAN to point to the DHCP server.  When the DHCP server receives a request it notes the source address of the VLAN and replies with an address from a matching scope.

That said with just ten printers I would personally assign static IP addresses.

Cheers,

TCP
0
 
LVL 1

Author Comment

by:nelslarson
ID: 21832459
well I got the dhcp server to work so it handed out the IP address to the server but I can't get it to print or ping it.
0
 
LVL 13

Expert Comment

by:TheCapedPlodder
ID: 21835134
How have you confirmed that DHCP is working?
0

Featured Post

Simple, centralized multimedia control

Watch and learn to see how ATEN provided an easy and effective way for three jointly-owned pubs to control the 60 televisions located across their three venues utilizing the ATEN Control System, Modular Matrix Switch and HDBaseT extenders.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This tutorial will go through the steps required to write a script that will back up the configuration settings of a HP-ProCurve switch. You will need to get the following things to follow this tutorial: Telnet Scripting Tool e.g. TST10.exe …
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
In this video, Percona Solution Engineer Dimitri Vanoverbeke discusses why you want to use at least three nodes in a database cluster. To discuss how Percona Consulting can help with your design and architecture needs for your database and infras…
How to fix incompatible JVM issue while installing Eclipse While installing Eclipse in windows, got one error like above and unable to proceed with the installation. This video describes how to successfully install Eclipse. How to solve incompa…

801 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question