Solved

USB stick not recognized

Posted on 2008-06-20
3
420 Views
Last Modified: 2013-12-15
I recently installed OpenSuse 11.0 64 bit on an HP Pavilion laptop
A usb stick is not recognized, lsusb is the same before and after plug in.

# /usr/sbin/lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 046d:c518 Logitech, Inc. MX610 Laser Cordless Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

# tail /var/log/messages
Jun 20 14:46:23 linux-yy30 kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jun 20 14:46:23 linux-yy30 kernel: hub 2-0:1.0: hub_port_status failed (err = -32)
Jun 20 14:46:26 linux-yy30 kernel: hub 2-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
Jun 20 14:46:35 linux-yy30 syslog-ng[1697]: last message repeated 3 times
Jun 20 14:46:35 linux-yy30 kernel: hub 2-0:1.0: unable to enumerate USB device on port 5
Jun 20 14:46:35 linux-yy30 kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jun 20 14:46:35 linux-yy30 kernel: hub 2-0:1.0: hub_port_status failed (err = -32)
Jun 20 14:46:38 linux-yy30 kernel: hub 2-0:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
Jun 20 14:46:47 linux-yy30 syslog-ng[1697]: last message repeated 3 times
Jun 20 14:46:47 linux-yy30 kernel: hub 2-0:1.0: unable to enumerate USB device on port 7
0
Comment
Question by:allelopath
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 14

Accepted Solution

by:
agriesser earned 500 total points
ID: 21834910
Could you try to connect the USB stick to the port where the mouse is currently connected to?
According to your /var/log/messages output some other USB ports seem to have problems.

Does the output of `cat /proc/partitions` change after plugging in the USB stick?
0
 
LVL 14

Expert Comment

by:agriesser
ID: 21924166
Any updates on this issue?
0
 
LVL 1

Author Comment

by:allelopath
ID: 22217467
works now, mysteriously

0

Featured Post

Visualize your virtual and backup environments

Create well-organized and polished visualizations of your virtual and backup environments when planning VMware vSphere, Microsoft Hyper-V or Veeam deployments. It helps you to gain better visibility and valuable business insights.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
000webhost.com default error log 1 60
Recover Lacie Edmini data. 11 64
Fuzzy search functionality DB2 UDB 3 34
RPM creation 6 21
Over the last ten+ years I have seen Linux configuration tools come and go. In the early days there was the tried-and-true, all-powerful linuxconf that many thought would remain the one and only Linux configuration tool until the end of times. Well,…
Linux users are sometimes dumbfounded by the severe lack of documentation on a topic. Sometimes, the documentation is copious, but other times, you end up with some obscure "it varies depending on your distribution" over and over when searching for …
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
Learn how to navigate the file tree with the shell. Use pwd to print the current working directory: Use ls to list a directory's contents: Use cd to change to a new directory: Use wildcards instead of typing out long directory names: Use ../ to move…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question