• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 5605
  • Last Modified:

How to register a SIP Phone to Cisco Unified Call Manager 6.1

I am running Cisco Unified Call Manager 6.1 and everything is working great;  I have about 70 Cisco 7941 and 7961 Phones deployed.

I need to know how to register a non cisco phone running SIP.  I have three Linksys WIP330 phones that I need to get working.  The phone are connected to an access point and have an IP address that the Call Manager DHCP is assigning.  I added a "Third Party SIP Device (Advanced)" and put it the MAC Address of a WIP330 phone and setup everything in CM.
---------------------------------
From Call Manager
Product Type:   Third-party SIP Device (Advanced)  
Device Protocol:   SIP  
Registration: Unknown
IP Address: Unknown
---------------------------------
The Phone says Registering and then Not Ready.....

Thanks for your help in advance!
0
scottrichie
Asked:
scottrichie
1 Solution
 
scottrichieAuthor Commented:
On the Linksys phone under SIP Options I had to put in the extension or DN number that was assigned by Call Manager. After that the phone registered sucessfully.
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now