Solved

cisco router 2600 VPN (PPTP)

Posted on 2008-06-22
2
420 Views
Last Modified: 2010-05-18
Good day all,
i have a cisco router 2600 series i would like to enable PPTP to authenticate 12 remote user against freeradius. does anyone has a working detailed configuration for the highlighted setup?
i tried all the available one in the internet but i didn't succeed.
thank you all
0
Comment
Question by:deniro1974
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 32

Accepted Solution

by:
harbor235 earned 500 total points
ID: 21845476
Here is the config for Windows:

Vpn-group 1
Default pptp vpdnes group
Accept-dialin
Protocol pptp
Virtual-template 1
!
Interface virtual-template 1
 Ip unnumbered fa0/0
peer default ip address pool WORD
no keepalive
ppp encrypt mppe auto required
ppp authentication pap chap ms-chap

You may need to change the ppp encrrypt and the ppp authentication methods. Take a look at the freeradius docs and see what the settings should be.

harbor235 ;}
0

Featured Post

Are You Headed to Black Hat USA 2017?

Getting ready for Black Hat next week? Kick things off with the WatchGuard Badge Challenge and test your puzzle and cipher skills. Do you have what it takes to earn our limited edition Firebox Badge? Get started today - https://crimsonthorn.net

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Suggested Courses
Course of the Month4 days, 3 hours left to enroll

630 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question