Solved

Cisco ASA VPN

Posted on 2008-06-24
2
12,780 Views
Last Modified: 2011-10-19
Hi,

I am troubleshooting a VPN Tunnel that was working between a Cisco ASA and a Cisco Router.

Attached is the log from the ASA

What does this mean?

I know my PSK is correct.

Thanks,
Mitchell
log.txt
0
Comment
Question by:RSMTECH_KC
2 Comments
 
LVL 28

Expert Comment

by:Jan Springer
ID: 21856994
Are you successful past both Phase 1 and Phase 2 of the negotiation?
Are your access lists for the crypto statements identical (except reversed) for both locations?

sh crypto isakmp sa detail
sh crypto ipsec sa detail

post the access lists for the crypto statements for both locations.
0
 
LVL 1

Accepted Solution

by:
RSMTECH_KC earned 0 total points
ID: 21869759
nvm got it working.  The Internet link at the remote site was flopping.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Optimal Xbox 360 connectivity requires "OPEN NAT". If you use Juniper Netscreen or SSG firewall products in a home setting, the following steps will allow you get rid of the dreaded warning screen below and achieve the best online gaming environment…
Like many others, when I created a Windows 2008 RRAS VPN server, I connected via PPTP, and still do, but there are problems that can arise from solely using PPTP.  One particular problem was that the CFO of the company used a Virgin Broadband Wirele…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question