Solved

sonicwall vpn

Posted on 2008-06-24
3
246 Views
Last Modified: 2010-04-12
hi
i had working site to site vpn between my 3 offices
Branch 1  -   TZ170
Branch 2  -   TZ170
Branch 3  -   TZ190
all are connected to each other with active site to site vpn
now, from br1 i can ping to any computer in br2 , even if tht computer is not having sonicwall ip address as its gateway and same i can do frm br.2 to br.1
but frm br 3 i can ping to only those computers in br. 2 and br. 1, wihch hav sonicwall ip address as its gateway

can sum1 jhelp


0
Comment
Question by:fakhruddin_ts
  • 2
3 Comments
 
LVL 8

Accepted Solution

by:
DenverRick earned 500 total points
ID: 21860538
You have created some one-way routes because your Gateways are not setup correctly.  All clients should be using their respective SonicWall as their Gateway.  Sonicwalls of your class are ment to only work in a STAR configuration, they will not work in a fully meshed scenario.
0
 

Author Comment

by:fakhruddin_ts
ID: 21864512
but its worknig between br.1 and br. 2
0
 
LVL 8

Expert Comment

by:DenverRick
ID: 21973375
So what did you change?
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

803 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question