• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 572
  • Last Modified:

I'm looking for the filename being assigned to a pc during a pxe boot.

I'm setting up SCCM 2007 on a Srv2003-sp2-R2 server. WDS, MDT2008 and all the SCCM roles are on the SCCM server, DHCP is on a different server.
When I try to pxe boot a pc, dhcp assigns an ip address, the pxe filter from MDT adds the MAC address to SCCM, but the pc shows PXE-T01:File not found / PXE-E3B:TFTP Error - File not found.
Last week I found a log file somewhere in SCCM where you could see the name of the file being issued to the PC, now I can't find the right log file to see what's going on. Can anyone help?
0
blackcs
Asked:
blackcs
1 Solution
 
gblictCommented:
I have same problem

Windows 2003 Sp2 with MDT and WDS installed.
Start the PC, press F12
PC get an IP address and them same msg
PXE-T01:File not found
PXE-E3B:TFTP Error - File not found


0
 
Nate630Commented:
What are your DHCP scope options set to (for that network segment/VLAN)?

066 Boot Server Host Name should be 'sccmserver.domain.com'
067 Bootfile Name should be 'SMSBoot\x86\wdsnbp.com'

You should also see a '\\sccmserver\REMINST\' file share.

One other note, I think that you may need to add an x64 boot image for PXE to work will some machines.  I think the PXE client will request a boot image for it's processor arch (x86 or x64).  In our case the Intel Core 2 machines wanted an x64 boot image.
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now