Solved

Catalyst Express 500POE and their Linksys Cousin

Posted on 2008-06-25
3
336 Views
Last Modified: 2013-11-09
Have one Catalyst Express POE 24 port in a small office with two Linksys switches attached.
- model EZXS55W, 5 port 10/100 switch
- model SD208, 8 port 10/100 switch
Anytime either of these switches are plugged in to the Catalyst Express, it will only give out one IP. Get no connectivity on the other 4 ports. When we use a Cisco 2950 everything works fine.
Have tried:
-different cables
-different ports
-using smart switch feature on the Catalyst Express (telling it x port is switch)
No dice. Anyone?
0
Comment
Question by:A929
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 

Author Comment

by:A929
ID: 21868205
Also note:
Have tried using port 1 and not the uplink on the EZXS55W Linksys per their website with no sucess.
0
 
LVL 79

Accepted Solution

by:
lrmoore earned 125 total points
ID: 21873766
Set the smartport role on the Express to none and be sure to disable port security on that port
0
 

Author Comment

by:A929
ID: 21879208
Irmoore,

Checking...not exactly an option, however, setting all ports to "other" which give unlimited MAC connections. Options for turning security off are greyed out in CNA and non-existant via the web interface.
0

Featured Post

Webinar: Aligning, Automating, Winning

Join Dan Russo, Senior Manager of Operations Intelligence, for an in-depth discussion on how Dealertrack, leading provider of integrated digital solutions for the automotive industry, transformed their DevOps processes to increase collaboration and move with greater velocity.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Managing 24/7 IT Operations is a hands-on job and indeed a difficult one. Over the years I have found some simple tips and techniques to increase the efficiency of the overall operations. The core concept has always been on continuous improvement; a…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question