Solved

ftp with netdrive

Posted on 2008-06-25
3
444 Views
Last Modified: 2013-11-29
Hi,  I used netdrive to map a ftp server to a local drive X and then use robocopy to copy the files.  The copy process is scheduled to run every 5 hours. Though the drive seems to stay connected all the time, I didn't get the updated files as I supposed to.  Anyone please let me know why?  
0
Comment
Question by:minnesotalu
3 Comments
 
LVL 1

Accepted Solution

by:
ED2008 earned 500 total points
ID: 21921055
This is probably because of the way NetDrive caches files, try looking in the Program Settings, under the Cache tab. It looks like you can set a timer to expire the files and listings. This might be a way of refreshing the files.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
AWS and VXLAN 8 435
CISCO 2960-s OSPF routing 19 106
Windows 2000 server can't ping domain controller until after clearing arp cache 6 58
QoS Policing 2 62
A few months ago I attended the Rocky Mountain IPv6 Summit which was a two-day educational event; it was the 3rd annual conference held here in Denver, Colorado that was held at the Hyatt Regency Denver at the Colorado Convention Center. It was an e…
Understanding FTPS File transfer is a common requirement in most Enterprises. While there are numerous ways to get a file from Point A to Point B over a network, perhaps the most common method still in use is FTP – File Transfer Protocol. FTP is …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

867 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now