devangshroff
asked on
cisco e1
how to configure point to point link og 2MFT card for 2 Mbps link
ASKER
hi ,
this is not working, plz help
this is not working, plz help
Do you know what IP address you are meant to be using?
If you are connecting to an ISP and you don't have a fixed IP you could try
ip address negotiated
Is this for connection to the internet?
Can you do the following commands and post the output here
show int
show run
show ip route
If you are connecting to an ISP and you don't have a fixed IP you could try
ip address negotiated
Is this for connection to the internet?
Can you do the following commands and post the output here
show int
show run
show ip route
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
encap ppp
ip address 172.16.1.1 255.255.255.252