gfatula
asked on
recovering the config from a cisco aironet 1200 series wap
i have replaced my original wlse that was damaged with a cisco 1030 wlse express. I do not have the password from the original wlse. I can access any of the 55 Cisco Aironet 1200 series waps i have via console. When I boot up the 1030 it asks for my login and password which I do not have. How can i login without the password from the old wlse? can I recover the config from one of the Cisco Aironet 1200 series waps and restore the config files to the 1030?
Try to use SNMP RW string to download the config. If SNMP is enabled with no ACL's and the RW string was left as 'private' you can pull the config using a tool like solarwinds engineer's toolset etc.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
http://www.cisco.com/en/US/docs/wireless/wlse/2.11/user/guide/CLIadmin.html#wp1075616
I know it is possible to import all the devices into the WLSE, try going through this:
http://www.cisco.com/en/US/docs/wireless/wlse/2.11/1030/installation/guide/1030disc.html
I am a little hazy on the importing of the config files because I don't have a wlse to play with to double check but I think it is possible.