Huzzain
asked on
cisco, Cisco 1841 with WIC 2T smart serial cards
i have cisco WIC 2T Smart Serial card installed on cisco 1841 router, and i have two 512kbps links connected on the WIC 2T card S0/0/0 & S0/0/1. The problem is i cant get both links to work simultaneously. s0/0/0 shows "serial is up line protocol is up" and s0/0/1 shows "serial is up line protocol down" .so if i issue show controllers command at this state on the s0/0/1 i get "clocked stopped" .i have tried swapping the interface among the two link but stil getting the same problem...thanks
Last Comment
ASKER CERTIFIED SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
check the serial cable
Routers
A router is a networking device that forwards data packets between computer networks. Routers perform the "traffic directing" functions on the Internet. The most familiar type of routers are home and small office cable or DSL routers that simply pass data, such as web pages, email, IM, and videos between computers and the Internet. More sophisticated routers, such as enterprise routers, connect large business or ISP networks up to the powerful core routers that forward data at high speed along the optical fiber lines of the Internet backbone. Though routers are typically dedicated hardware devices, use of software-based routers has grown increasingly common.
49K
Questions
--
Followers
--
Top Experts
Get a personalized solution from industry experts
TRUSTED BY
ASKER