mcracco
asked on
Can't access connect menu on thin client
I have a T5135 thin client that was very happy operating in local mode on my network. Because I'm a noobie dope, I changed in settings from local to network. Now when the device boots it goes direct to a login prompt without showing the HP Thin Connect dialog.
Supposedly F9 at boot is the was to get into config but that does nothing for me. F10 gets into BIOS but that is not where operating mode is set.
How can I access the configuration???
Thanks.
Supposedly F9 at boot is the was to get into config but that does nothing for me. F10 gets into BIOS but that is not where operating mode is set.
How can I access the configuration???
Thanks.
Last Comment
ASKER CERTIFIED SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
That did it. The flash utility formats the usb drive and makes bootable with the iso file. Duck zoupa!
Networking Hardware-Other
Networking hardware includes the physical devices facilitating the use of a computer network. Typically, networking hardware includes gateways, routers, network bridges, modems, wireless access points, networking cables, line drivers, switches, hubs, and repeaters. But it also includes hybrid network devices such as multilayer switches, protocol converters, bridge routers, proxy servers, firewalls, network address translators, multiplexers, network interface controllers, wireless network interface controllers, ISDN terminal adapters and other related hardware.
28K
Questions
--
Followers
--
Top Experts
Get a personalized solution from industry experts
TRUSTED BY
ASKER