<div>
Cisco has a range command for that purpose.<br />
<br />
interface range fa0/1 - 24
</div>


<div>
<div class="content wysiwyg-content">
I need to make a common change to all ports on a series of switches. &nbsp;How to I make this change to a range of ports on the switch so I do not have to do it over and over again for each of the 24 ports?
</div>
</div>


I need to make a common change to all ports on a series of switches.  How to I make this change to a range of ports on the switch so I do not have to do it over and over again for each of the 24 ports?

Port Range Edit

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Networking hardware includes the physical devices facilitating the use of a computer network. Typically, networking hardware includes gateways, routers, network bridges, modems, wireless access points, networking cables, line drivers, switches, hubs, and repeaters. But it also includes hybrid network devices such as multilayer switches, protocol converters, bridge routers, proxy servers, firewalls, network address translators, multiplexers, network interface controllers, wireless network interface controllers, ISDN terminal adapters and other related hardware.