<div>
is possible activate the spanning tree with only 1 switches in the net for block the redundant link traffic overload
</div>


<div>
I feel that the question posted has been answered.<br />

</div>


<div>
Suggest accept answer 22043230<br />
<br />

</div>


<div>
<div class="content wysiwyg-content">
i have the 5 k switches<br />
2 x &nbsp;swithes unmanaged des 1224 &nbsp;10-100<br />
1 x dlink managed with spanning tree (but not enabled) dsg 3224<br />
1 x 16 port ovislink unmanaged<br />
1 x 8 zyxel 1gbit unmanaged<br />
in the network ave 4 access point and i have 2 machine that connect with the network via wireless and ethernet in the same time <br />
after i disonnect the cables that connect the switches the net refunction correcly<br />
i want enable the spanning tree for resolve this problem , is a good idea?
</div>
</div>


i have the 5 k switches
2 x  swithes unmanaged des 1224  10-100
1 x dlink managed with spanning tree (but not enabled) dsg 3224
1 x 16 port ovislink unmanaged
1 x 8 zyxel 1gbit unmanaged
in the network ave 4 access point and i have 2 machine that connect with the network via wireless and ethernet in the same time 
after i disonnect the cables that connect the switches the net refunction correcly
i want enable the spanning tree for resolve this problem , is a good idea?

1-2 time a day for 15-30 minute the network traffic is overload and network don't function

Networking hardware includes the physical devices facilitating the use of a computer network. Typically, networking hardware includes gateways, routers, network bridges, modems, wireless access points, networking cables, line drivers, switches, hubs, and repeaters. But it also includes hybrid network devices such as multilayer switches, protocol converters, bridge routers, proxy servers, firewalls, network address translators, multiplexers, network interface controllers, wireless network interface controllers, ISDN terminal adapters and other related hardware.

Networking Hardware-Other

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.