2015376
asked on
vpn connection Through Microsoft vpn
hi when i use microsot vpn connection internally from the office to connect another client side it disable the internet on local system..and i cnat usee internet while connected to the microsoft vpn....is there any way that i can get rid of this thing....
Last Comment
ASKER CERTIFIED SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
Please do a route print before and while your are connected, and post the result. Important are 0.0.0.0 routes.
ASKER
i am sending u before and after routes...
before connecting to vpn....
==========================
Interface List
0x1 ..........................
0x2 ...00 18 8b b8 c1 62 ...... Broadcom NetXtreme 57xx
Gigabit Controller - Packet Scheduler Miniport
0x3 ...00 19 7d d8 bd 77 ...... Dell Wireless 1490 Dual Band WLAN
Mini-Card - Packet Scheduler Miniport
==========================
==========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.17.254 192.168.17.114 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
Default Gateway: 192.168.17.254
==========================
Persistent Routes:
None
After connecting to VPN.....
==========================
Interface List
0x1 ..........................
0x2 ...00 18 8b b8 c1 62 ...... Broadcom NetXtreme 57xx
Gigabit Controller - Packet Scheduler Miniport
0x3 ...00 19 7d d8 bd 77 ...... Dell Wireless 1490 Dual Band WLAN
Mini-Card - Packet Scheduler Miniport
0x20005 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
==========================
==========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.17.254 192.168.17.114 20
0.0.0.0 0.0.0.0 192.168.1.201 192.168.1.201 1
Default Gateway: 192.168.1.201
==========================
Persistent Routes:
None
please let me know....
before connecting to vpn....
==========================
Interface List
0x1 ..........................
0x2 ...00 18 8b b8 c1 62 ...... Broadcom NetXtreme 57xx
Gigabit Controller - Packet Scheduler Miniport
0x3 ...00 19 7d d8 bd 77 ...... Dell Wireless 1490 Dual Band WLAN
Mini-Card - Packet Scheduler Miniport
==========================
==========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.17.254 192.168.17.114 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
Default Gateway: 192.168.17.254
==========================
Persistent Routes:
None
After connecting to VPN.....
==========================
Interface List
0x1 ..........................
0x2 ...00 18 8b b8 c1 62 ...... Broadcom NetXtreme 57xx
Gigabit Controller - Packet Scheduler Miniport
0x3 ...00 19 7d d8 bd 77 ...... Dell Wireless 1490 Dual Band WLAN
Mini-Card - Packet Scheduler Miniport
0x20005 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
==========================
==========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.17.254 192.168.17.114 20
0.0.0.0 0.0.0.0 192.168.1.201 192.168.1.201 1
Default Gateway: 192.168.1.201
==========================
Persistent Routes:
None
please let me know....
SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
i check the route and i am able to se ethe entry eith 192.168.1.0... also i checkd the rasphonbe.pbk there ipprioritize zone is set to 1....
any other suggestion
any other suggestion
As I said, it MUST NOT be 1. Set it to 0.
ASKER
i did the change and it still didnt work....
You also said you have disabled it in your connection profile. Please look again if you changed it on the correct connection entry, the one with "[your connection name here] " in PBK file.
ASKER
yes i did the chnage under my connection profile in pbk file....
If the server you are connected to won't let you split tunnel, it won't let you split tunnel. No matter what settings you set on your side.
ASKER
what that mean split the tunnel...please explain me bit may be i can ask my client to do some chnages to get rid of this problem...
A split tunnel is when you allow data over a connection to take two different paths.
In this case, all of your traffic is going over the VPN, to the client's network, and then trying to go to the internet, where it might be getting blocked, or not routed properly.
What you want to happen is that any traffic that isn't specifically going to your client should go directly to your local network, where it would be routed normally. In that case, a split tunnel would allow you to both get to the internet, and your client.
In this case, all of your traffic is going over the VPN, to the client's network, and then trying to go to the internet, where it might be getting blocked, or not routed properly.
What you want to happen is that any traffic that isn't specifically going to your client should go directly to your local network, where it would be routed normally. In that case, a split tunnel would allow you to both get to the internet, and your client.
@nalanbar:
Using PPTP and RRAS, I do not know of a means to override that settings by server policies. So how can the server force that setting?
Using PPTP and RRAS, I do not know of a means to override that settings by server policies. So how can the server force that setting?
VPN
A virtual private network (VPN) is a network that uses a public telecommunication infrastructure, such as the Internet, to provide remote offices or travelling users access to a central organizational network securely. VPNs encapsulate data transfers using secure cryptographic methods and other security mechanisms to ensure that only authorized users can access the network and that the data cannot be intercepted.
26K
Questions
--
Followers
--
Top Experts
Get a personalized solution from industry experts
TRUSTED BY
ASKER