Link to home
Start Free TrialLog in
Avatar of prlit
prlit

asked on

L2L Cisco Pix 515e - Netgear FVS338

Hey Everyone, I'm trying to establish a L2L VPN between a Pix 515e and NETGEAR ProSafe VPN Firewall FVS338. I've set up numerous L2Ls between Ciscos, but this is my first experience with a netgear. I dont know too much about the netgear, but am using their VPN GUI wizard to set it up on that end. Here is the error I'm getting on my PIX.

QM FSM Error (P2 Struct &0x24dc750, mess ID 0xcddaa571)
Removing Peer from Correlator table failed, no match!
Could not delete route route for l2l peer that came in on a dynamic map,

I cab post the config of the pix but it's rather large.
Avatar of prlit
prlit

ASKER

Forgot to list the problem! But as you can probably guess, the connection does not make it through P2. I've double checked everything that I can think of (ie, pre-shared keys), Any ideas?
ASKER CERTIFIED SOLUTION
Avatar of Les Moore
Les Moore
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of prlit

ASKER

PFS was it! Thanks a bunch. Just had to enable it on both sides (I usually keep it disabled.)