<div>
You may try MAC based reservations
</div>


<div>
<div class="content wysiwyg-content">
Hi, I have a DHCP server. I want to configure 4 Subnets in it.I have about 500 users. All my switches are NON manageble Switches. I want to give IPs to the users from the same DHCP server.I know I have to put a DHCP relay agent in all subnets. But how would DHCP server will give IPs to different subnets. Where I need to do the setting in the DHCP Server
</div>
</div>


Hi, I have a DHCP server. I want to configure 4 Subnets in it.I have about 500 users. All my switches are NON manageble Switches. I want to give IPs to the users from the same DHCP server.I know I have to put a DHCP relay agent in all subnets. But how would DHCP server will give IPs to different subnets. Where I need to do the setting in the DHCP Server

Configure Scopes in DHCP

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).