asked on

Multiple Syslog IP Address

Currently I have one syslog server. All my cisco routers & switches are configured to send the syslog messages to the syslog server.
I have enabled the following commands
<logging 1.1.1.1>

I have currently one more new syslog server <1.1.1.2>.
I want to configure my cisco routers & switches to send the syslog to both the syslogs servers.

i enabled the following commands in each routers and switches.
<logging 1.1.1.1>
<logging 1.1.1.2>

I would like to know with the above commands whether all the logs will be sent to both the syslog servers or only to the primary syslog server<1.1.1.1>. If the primary syslog server is not reachable then it will send the syslog to the other server<1.1.1.2>.

Please clarify

harbor235

All logging will go to bith logging servers. the type of messages are specified by additional logging commands.

Typically my default logging level is informational, plenty of log messages generated.

harbor235 ;}

harbor235

typo;

All logging will go to both logging servers. the type of messages are specified by additional logging commands.

Typically my default logging level is informational, plenty of log messages generated.

harbor235 ;}

ASKER CERTIFIED SOLUTION

lanboyo

membership

Create a free account to see this answer

Signing up is free and takes 30 seconds. No credit card required.

See answer

harbor235

I am confused why the points were awarded to lanboyo, I answered your question, lanboyo told you I was correct and added how to turn on logging. Since you were already logging to one syslog server you already had logging enabled, confusing !

harbor235 ;}