Link to home
Create AccountLog in
Avatar of joe508hk
joe508hkFlag for Hong Kong

asked on

CISCO ASA5500 SITE TO SITE VPN SETUP IN CLI MODE

Dear all,

I'm a newbi to setup cisco asa, I need to setup a vpn connection between 3 location and info as follow:

Site A:
WAN IP: aaa.aaa.aaa.xxx
WAN Subnet: aaa.aaa.aaa.yyy
Gateway: aaa.aaa.aaa.zzz
DNS: 123.123.123.123
Local IP: 192.168.11.0 255.255.255.0

Site B:
WAN IP: bbb.bbb.bbb.xxx
WAN Subnet: bbb.bbb.bbb.yyy
Gateway: bbb.bbb.bbb.zzz
DNS: 234.234.234.234
Local IP: 192.168.12.0 255.255.255.0

Site C:
WAN IP: ccc.ccc.ccc.xxx
WAN Subnet: ccc.ccc.ccc.yyy
Gateway: ccc.ccc.ccc.zzz
DNS: 345.345.345.345
Local IP: 192.168.13.0 255.255.255.0

All local client can access into the internet without and blocking and access into all 3 sites network.

Can any one post a simple setting for all 3 firewall??

many thanks.
ASKER CERTIFIED SOLUTION
Avatar of Les Moore
Les Moore
Flag of United States of America image

Link to home
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
See answer
Do you have any questions about the posted config?