UHampton
asked on
Broadcasat SSID
I have 4 Cisco Aironet 1240AG Access Points in a site. However, the SSID was set not to broadcast by the installer. I need this to be seen by all wireless networks. But I cannot find the setting(s) to enable this. What and where is this done. I have connected to the web interface and cannot see where the setting is.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I nallready have the SSID on it and want to set it to broadcast as it's not at this time. ITS HIDDEN. How do I do this
Read carefully step 6 in the first reply.
i.e. Step 6
guest-mode
(Optional) Designate the SSID as your access point's guest-mode SSID. The access point includes the SSID in its beacon and allows associations from client devices that do not specify an SSID.
I'm pretty sure the 'guest-mode' SSID is the only one that can be not hidden... the rest are all hidden.
i.e. Step 6
guest-mode
(Optional) Designate the SSID as your access point's guest-mode SSID. The access point includes the SSID in its beacon and allows associations from client devices that do not specify an SSID.
I'm pretty sure the 'guest-mode' SSID is the only one that can be not hidden... the rest are all hidden.
You can archive that by visiting on this sites:
http://www.cisco.com/en/US/docs/wireless/access_point/1240/installation/guide/124h_c3.html
http://www.cisco.com/en/US/docs/wireless/access_point/1240/quick/guide/ap1240qs.html
Great is our GOD.
:)