• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 272
  • Last Modified:

Exchange: Set up rule for No NDR with particular senders

We have a customer who has recently been involved in a bouncing cycle with a list server - the customer's server bounces the e-mail from the list server to the list server's response address & the list server was responding with bad commands (a majordomo list server).  Anyway, the cycle has been caught & manually cleaned up via freezing the outbound queue & manually deleting the bounces.

Can someone direct me to a simpler method of automating a particular sender into a No NDR deletion while retaining normal NDR bounces?
  • 2
1 Solution

looks like a possible solution as well but would probably mean some more software.

With the exchange software itself other than some filtering you can do, the only way seems to be via 3rd party software


Some of the info from Guru Sembee.

Looks like its pretty hard to do it effectively without some additional software. There is however some filtering recommendations which should give you a start.
BarthaxAuthor Commented:
Thanks, I guess it'll be the same answer in the end for us.  As it happens, it's not an NDR flood - it is a list server receiving the customer's NDRs & bouncing them back as they are invalid commands on the list server!
BarthaxAuthor Commented:
The answer was the opposite of the circumstances mentioned, but is essentially the same answer in the end. ;)
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now