Solved

vpn any connect

Posted on 2008-09-30
3
668 Views
Last Modified: 2012-05-05
when ever i connect through vpn any connect to my client my local resources stop working like i am not able to get access for any of my servers my network drives and my outlook...is there any way i can fix that...
0
Comment
Question by:2015376
  • 2
3 Comments
 
LVL 8

Expert Comment

by:halejr1
Comment Utility
Sounds like a split-tunneling setting.  If I am correct, some network architects do that by design to enhance the security of their protected network.  By limiting your local connectivity they limit the risks to the corporate network that you are accessing.  One thing you might notice is that if you browse the web, your actually going out your VPN public interface and not that of your local, albeit more efficient interface.

here is wikpedia's definition:  http://en.wikipedia.org/wiki/Split_tunneling

I'd need to know more about the definition of your VPN, but if you enable split-tunneling you should be able to access your local resources.
0
 

Author Comment

by:2015376
Comment Utility
we have cisco asa5000 router and we have isa 2006 as well and then there is lan....how can i enable split tunneling from cisco router
0
 
LVL 8

Accepted Solution

by:
halejr1 earned 500 total points
Comment Utility
Here is an example of how you can enable split tunnelling on the asa5500.  May be very similar / same as the asa 5000.

Good Luck!

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Using Windows 2008 RRAS, I was able to successfully VPN into the network, but I was having problems restricting my test user from accessing certain things on the network.  I used Google in order to try to find out how to stop people from accessing c…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now