Solved

Routing Issue - Site to Site VPN

Posted on 2008-09-30
1
317 Views
Last Modified: 2012-05-05
Hello All,

I have a site to site VPN setup between a ASA & 851W router, I seem to have an issue with routing that is baffling me.

As my source and destination protected networks as 10.10.0.0/16 (home office) and 10.10.220.0/29 (remote soho). The ASA has a route of 10.10.0.0/16 and this point to our MPLS router that know off all the other subnets. The local subnet for the ASA is 10.10.20.0/24. Once the VPN is established I can ping devices on the 10.10.20.0/24 network, but not on say the 10.10.24.0/24 network. Now here is the part that I baffled about, if I remove the 10.10.0.0/16 route and replace it with 10.10.24.0/24 point to the same MPLS router as the next hop it works! Why would the broader route not work?

Thanks!
0
Comment
Question by:dehmerl
1 Comment
 

Accepted Solution

by:
dehmerl earned 0 total points
ID: 22608361
Ok I got it sorted....a bit of searching on the Cisco site...
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question