Solved

Site-Site VPN Connection with RV042 link to existing network

Posted on 2008-09-30
6
314 Views
Last Modified: 2013-11-29
Hi,

I am being ask to connect one of our office in Asia, 4-5 computers only, this will be connected to our main office here in Australia. The main purpose of the connection is to access a citrix connnection here in Australia , currently setup on one of our servers, 10.110.6.X network.

I am planning to use RV042 on both ends, to do a site-site VPN connection.

Our current setup now in Australia is,
Internal network  in Australia.
10.110.32.X = Workstations
10.110.6.X = Servers
SM : 255.255.0.0

I'm just not sure on how it will fit in with the current setup...ie, what LAN subnet should i use in Asia office? do i need to use a different subnet in Australia?

Do i need a dedicated workstation in Australia, with dual network cards? 1 for internal, 10.110.32.X, and one for external, ie, 192.168.200.X  that connects to the RV042 in Australia?

Thanks for any help...
0
Comment
Question by:roadrunnerz88
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 2
6 Comments
 
LVL 63

Expert Comment

by:SysExpert
ID: 22611127
If all you need access to is the 6.x subnet, then set up a different subnet in Asia, and do a site to site VPN tunnel between the 2 sites. You should not need access ot the 32.x subnet at all from your description.


I hope this helps !
0
 

Author Comment

by:roadrunnerz88
ID: 22611200
Thanks SysExpert,
can i set the subnet in Asia as 192.168.X.X ,SM:  255.255.255.0,

Once the site-site VPN is established, do i just then connect the RV042 on Australia to one of our
Switch? Would this will then work? Or i need a dedicated PC with dual NIC Cards? one NIC connected
to Australia 10.110.X.X , and one NIC Connected to RV042?

Thanks a lot.
0
 

Author Comment

by:roadrunnerz88
ID: 22614880
Anyone?

Thanks,
0
When ransomware hits your clients, what do you do?

MSPs: Endpoint security isn’t enough to prevent ransomware.
As the impact and severity of crypto ransomware attacks has grown, Webroot has fought back, not just by building a next-gen endpoint solution capable of preventing ransomware attacks but also by being a thought leader.

 
LVL 63

Assisted Solution

by:SysExpert
SysExpert earned 125 total points
ID: 22617048
You can use any subnet that is not the same as the main offfice.

You should connect the RV042 to your external ISP connection directly or through the switch that handles all external connections.

Is this a fixed IP or DHCP in Austalia ?


I hope this helps !
0
 

Accepted Solution

by:
roadrunnerz88 earned 0 total points
ID: 22619652
Thanks Sysexpert,

Yes, I have to connect it to the external ISP connection, but how about connecting it to our existing LAN in Australia (10.110.6.1)? Do i just connect a cable from one of our switch in Australia network, to one of the ports in RV042 in Australia?

WAN IP is static on both location.
We have DHCP on our LAN in Australia.

would the diagram below work, ?

Australia                                                                                                                                         Asia

AU LAN;---RV042--Modem----ISP Australia------Internet-------ISP Asia-----Modem---RV042-----Asia Lan
10.110.6.1                                                                                                                            20.110.10.1-254
10.110.32.1                                                                                                                    SM: 255.255.2550.0
SM: 255.255.0.0


0
 

Author Comment

by:roadrunnerz88
ID: 22644698
good
0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Recently, Microsoft released a best-practice guide for securing Active Directory. It's a whopping 300+ pages long. Those of us tasked with securing our company’s databases and systems would, ideally, have time to devote to learning the ins and outs…
Uncontrolled local administrators groups within any organization pose a huge security risk. Because these groups are locally managed it becomes difficult to audit and maintain them.
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question