Solved

how to setup VPN with PIX515e (IPSEC) ?

Posted on 2008-10-01
2
406 Views
Last Modified: 2012-05-05
Hi all

I don't know how to setup VPN with my cisco pix 515e.
We have a PPPoE (DSL) internet connection, and I think I need to have to use IPSEC instead of PPTP.

Can someone show me the step by step (for dummy) instruction on how to do that ?  Thanks.
0
Comment
Question by:blaw25
2 Comments
 
LVL 33

Accepted Solution

by:
MikeKane earned 500 total points
ID: 22615334
You can do a Peer to peer vpn where the Pix would connect to another firewall for connectivity between the 2 networks.   You can also setup the pix to allow a vpn client to access your network.    

Depending on what you want, cisco already has the step by steps to do this at:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml
and/or
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080884c2f.shtml

All the examples are at:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html



0

Featured Post

What Security Threats Are You Missing?

Enhance your security with threat intelligence from the web. Get trending threat insights on hackers, exploits, and suspicious IP addresses delivered to your inbox with our free Cyber Daily.

Join & Write a Comment

I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now