Solved

TFTP being blocked on server

Posted on 2008-10-01
3
565 Views
Last Modified: 2012-05-05
We just setup a 2008 server. We are running Putty to connect to outside devices and Pumpkin on the server. The firewall is open to port 69, but we are unable to connect. The firewall is turned off on the server. Any ideas as to what I can look at and fix this would be great. Thanks.
0
Comment
Question by:cstallings
3 Comments
 
LVL 4

Accepted Solution

by:
placebo69a earned 500 total points
ID: 22617772
Hi there!

I'm assuming you are getting a connection timeout message when you try and connect to pumpkin remotely. If this is not the case please say so.

Does pumpkin work locally? If you can't log on to pumpkin locally there is a problem with the listening port. Check your pumpkin configuration to make sure it's listening at port 69.

If it does work locally and you can't connect from a computer on the same subnet you should make sure no firewall is active on either machine. Try checking for the port availabilty using the following command:
telnet server_ip_address 69

If it works on your subnet but not from an extranet/the internet your firewall may be filtering the port, try making an ad-hoc rule in your firewall and give a specfic ip/port priority over all other rules to an real address from which you can test the connection. Use the basic telnet command I've provided above.

Let me know how it goes :)
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Join & Write a Comment

Normally after a failure of Domain Controller, when promoting new DC the DC is renamed, we will discuss the options in Dcpromo to re-create the DC with the same name. Scenario: You are a small IT shop with two Domain Controllers (Domain Contr…
You might have come across a situation when you have Exchange 2013 server in two different sites (Production and DR). After adding the Database copy in ECP console it displays Database copy status unknown for the DR exchange server. Issue is strange…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now