Solved

SCCM2007 PXE don't config DHCP option

Posted on 2008-10-02
4
4,391 Views
Last Modified: 2013-11-21
In a test lab, I have 2 Windows 2008 std server i a domain, and a test klient
Server 1 is domain controller, DNS and DHCP server
Server 2 is member of domain, running IIS,WDS, SQL, SCCM2007R2

WDS is only install on the server 2, not configure, as I have read, is WDS config when the PXE service is install in SCCM console

When I add PXE service role in SCCM on server 2, the DHCP server on server 1 is not configure with option 66 and 67
When I boot a klient, the klient can's find a network boot service

I can't fine any error in the eventlog, or in the setup log files for SCCM
0
Comment
Question by:Focon
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 8

Expert Comment

by:U_Mansson
ID: 22631737
Hi

Does the client get an IP-adress from the DHCP server?

If it does, have you assigned any OS package to the client?

Have you configured SCCM R2 to respond to unknow clients or have you added the MAC adress to the SCCM database?
0
 

Author Comment

by:Focon
ID: 22632227
Hi

The client get an IP adress from the DHCP server

The SCCM R2 is config to respond to unkonow clients

The DHCP server don't have anything config for network boot in the DHCP option (66 and 67)

Do I need to run the WDS config, after I have add the PXE service role to SCCM R2, as I have read, the SCCM R2 config the WDS under installation of the PXE service role ?

/Jan
0
 
LVL 8

Accepted Solution

by:
U_Mansson earned 250 total points
ID: 22634762
When you run WDS on Win2008 you don't have to configure WDS before you can use it. In Win2003 you are not able to start the service before WDS is configured. So if the service for WDS is started you are good to go.

Did you have any OS package advertised?
0
 

Author Closing Comment

by:Focon
ID: 31623584
After inunstall both sccm PXE service and WDS, and remote alle Remoteinst catalog in the root of all drives
Remove all DHCP option, about the PXE (option 60, 66 and 67)
Reboot the server
First install WDS (Don't run anyconfig on WDS)
Install Sccm PXE service, and then configure the sccm PXE service from sccm console, then everything works
(remember, that unsign client don't get any OS, befor you have add unsigned comuter to sccm 2007)
0

Featured Post

Office 365 Training for IT Pros

Learn how to provision tenants, synchronize on-premise Active Directory, implement Single Sign-On, customize Office deployment, and protect your organization with eDiscovery and DLP policies.  Only from Platform Scholar.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Problem Description: Actually I found the below issue with some customers after migration from SMS 2003 to SCCM 2007 and epically if they change site code, some clients may appear in the console with old site code, plus old sites still appearing …
Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
Finds all prime numbers in a range requested and places them in a public primes() array. I've demostrated a template size of 30 (2 * 3 * 5) but larger templates can be built such 210  (2 * 3 * 5 * 7) or 2310  (2 * 3 * 5 * 7 * 11). The larger templa…
Exchange organizations may use the Journaling Agent of the Transport Service to archive messages going through Exchange. However, if the Transport Service is integrated with some email content management application (such as an antispam), the admini…

732 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question