Solved

Network Performance: Is this fast or slow?

Posted on 2008-10-03
3
260 Views
Last Modified: 2013-12-07
I copied a 910 MB file from a Notebook to a network share. It took 1:40 min. Is this an acceptable time within a corporate network (100 MBit)?
What time should it last to be acceptable?
Chris
0
Comment
Question by:chriswies
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 2

Expert Comment

by:thomfre
ID: 22631998
That is a bit slow. The speed you got was about 1.3MBit/s

With full 100MBit/s it should take 1 minute and 16 seconds..
But other traffic on the network, your computer doing other stuff, the network share handling other connections it will never be that fast.

But this was slow, it should be finished in 5 to 15 minutes...
0
 
LVL 2

Accepted Solution

by:
thomfre earned 125 total points
ID: 22631999
Sorry, my bad, i read hours in stead of minutes... That means my calculations are very wrong! The speed you got is actually verry good!
0
 

Author Comment

by:chriswies
ID: 22632009
Thanks, that helps!
Chris
0

Featured Post

MS Dynamics Made Instantly Simpler

Make Your Microsoft Dynamics Investment Count  & Drastically Decrease Training Time by Providing Intuitive Step-By-Step WalkThru Tutorials.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
This program is used to assist in finding and resolving common problems with wireless connections.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses

623 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question