Solved

creating second subnet

Posted on 2008-10-03
2
363 Views
Last Modified: 2012-05-05
I want to create sepreate subnet. Using unused second ethernet card on the
server . IP address of the first ethernet card is 192.168.1.4. I want
to assign IP address 192.168.5.17 to the second ethernet card. Second card should be communicate with the workshop equipment and
with the first ethernet card as well.

Workshop access points are to have an IP address of 192.168.5.201 - 192.168.5.212
The hand-held terminals are to be in IP address range of 192.168.5.101  192.168.4.150
The truck mounted in the range of 192.168.5.151  192.168.5.199


How can I do this and from where should I start. Please let me have step
by step guide
0
Comment
Question by:nakulamin
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 4

Accepted Solution

by:
cheeselover73 earned 500 total points
ID: 22632702
1. Assign IP adddress to second NIC (and 255.255.255.0 mask, no default gateway), enable it
2. Make sure that all devices on second subnet have their default gateway set to 192.168.5.17 (that only if you want them to communicate with first subnet)
3. If devices on first subnet have internet access through this server or they don't have internet access at all, make sure that devices on first subnet have default gateway set to 192.168.1.4 (that only if you want them to communicate with second subnet)
    If devices on first subnet have internet access through some other router (for example 192.168.1.1) leave that router as their default gateway. On router, add static route for subnet 192.168.5.0 mask 255.255.255.0 gateway 192.168.1.4 (that only if you want them to communicate with second subnet)
3. enable Routing and Remote Access in W2k3 server, LAN routing only (that only if you want communication between subnets)

that should do it.
0
 

Author Comment

by:nakulamin
ID: 22647983
Do I have to change any DHCP server or relay agent setting ?
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
This article shows the method of using the Resultant Set of Policy Tool to locate Group Policy that applies a particular setting.
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question