Solved

Scanner doesn't work, hp solution center didn't detect the hardware. Wireless with acces point D-link DWL-G700AP

Posted on 2008-10-04
2
2,183 Views
Last Modified: 2013-12-15
I recently purchased a HP Photosmart C6380. I installed this on a wireless network (acces point D-Link DWL-G700AP).
The engine prints but doesn't scan. The HP solution center doesn't detect the hardware.
What can I do.

Laptop HP
Windows XP S-pack2
0
Comment
Question by:biegie
2 Comments
 
LVL 3

Accepted Solution

by:
rondawel earned 300 total points
ID: 22641624
Check your firewall.
 
0
 

Author Comment

by:biegie
ID: 22647506
I closed the firewall, but the problem persists.
The printers IP-adress changes every time I put the printer on. I couldn't give the printer a name or IP-adress (persisting) in de D-link DWL-G700AP.
0

Featured Post

Don't miss ATEN at NAB Show April 24-27!

Visit ATEN at NAB Show to learn how our "Seamlessly Entertaining" solutions deliver fast, precise video streaming without delays for the broadcasting and media environment. ATEN will showcase its 16x16 Modular Matrix Switch (VM1600) and KVM Over IP Solution (KE6900 series).

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Surface Pro 4 keyboard not responding 4 69
Where do I find HP printer shortcuts? 3 59
Cisco 3800 series and WISM2 1 40
hp scanjet problem 2 27
This article describes how to perform a hard reset on your router. Usually this is most-useful on wireless routers, but the same concept applies to nearly all home/SOHO routers. This process will return the router to factory defaults, so record your…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question