curwengroup
asked on
ASA 5510 routing
We're having a network setup issue i'm not quite sure how to approach.
Basically i need to route traffic to a certain subnet to a different internal gateway. This is how the network setup looks:
ISP - External Switch - ASA 5510 - LAN Segment 1 (192.168.60.0/24)
|
Direct site link - Cisco 871 ------
|
Cisco 871 - LAN Segment 2 (192.168.65.0/24)
I need to be able to route traffic from LAN segment 1 to LAN segment 2, i'm hoping to be able to do this directly on the ASA 5510 by telling it toroute all traffic destined to the 192.168.65.0 subnet to the IP address of the Cisco 871 (192.168.60.5)
Anyone have an idea if i can even do this?
Thanks
Basically i need to route traffic to a certain subnet to a different internal gateway. This is how the network setup looks:
ISP - External Switch - ASA 5510 - LAN Segment 1 (192.168.60.0/24)
|
Direct site link - Cisco 871 ------
|
Cisco 871 - LAN Segment 2 (192.168.65.0/24)
I need to be able to route traffic from LAN segment 1 to LAN segment 2, i'm hoping to be able to do this directly on the ASA 5510 by telling it toroute all traffic destined to the 192.168.65.0 subnet to the IP address of the Cisco 871 (192.168.60.5)
Anyone have an idea if i can even do this?
Thanks
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
that is the only alternative. Glad you got it sorted out.