Improve company productivity with a Business Account.Sign Up

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 650
  • Last Modified:

Cisco PIX 501 Telnet

Hi,

I'm struggling to connect to my PIX 501 using a DOS telnet session, below is my current and working running config for my home cable environment, any pointers as to any errors in the config would be appreciated!

PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password SX/Y7cXtfgcNOcz9 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfw
domain-name workgroup
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names        
access-list outside_access_in permit tcp any interface outside eq smtp
access-list outside_access_in permit tcp any interface outside eq https
access-list fromoutside deny ip any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 192.168.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.0.1 255.255.255.255 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.2-192.168.0.10 inside
dhcpd dns 81.26.107.2
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
terminal width 80
Cryptochecksum:18186fe928097d8c5af8e95b1fd267c4
: end
pixfw#
0
dt3itsteam
Asked:
dt3itsteam
  • 2
1 Solution
 
sstone55423Commented:
telnet 192.168.0.0 255.255.255.0 inside
This allows connection from anywhere on the 192.168.0.X network.  If your desktop is set to 192.168.0.10, this would work.
0
 
dt3itsteamAuthor Commented:
Thanks I noticed the subnet mask was incorrect, now rectified and can now telenet into the FW!
0
 
sstone55423Commented:
Great!  Let me know if you have any other questions.  
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

The Lifecycle Approach to Managing Security Policy

Managing application connectivity and security policies can be achieved more effectively when following a framework that automates repeatable processes and ensures that the right activities are performed in the right order.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now