Solved

Cisco ASA 5520 AnyConnect client configuration

Posted on 2008-10-07
3
5,657 Views
Last Modified: 2013-11-05
We are using the IPSEC clients right now and I'm configuring the ASA to use the anyconnect client. Before changing any settings, I tried to connect and it didn't work. Then after configuring it, I get prompted for my username and password. If i input a wrong password, it tells me invalid password. When i put a correct password, I get "AnyConnect is not configured on the VPN server" or something very similar to that.

Does anyone know what I need to do to get it to work?
0
Comment
Question by:jjmartineziii
  • 2
3 Comments
 
LVL 12

Accepted Solution

by:
Pugglewuggle earned 500 total points
ID: 22666215
You need to make sure the svc commands is enabled... here is a document detailing how to setup anyconnect on an ASA.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808efbd2.shtml
The basic commands are:
webvpn
enable outside
svc enable

The document explains it all in detail, but if you have questions just ask and I'll answer!
Cheers!
0
 
LVL 12

Author Comment

by:jjmartineziii
ID: 22725475
Would you mind linking me to an article or explaining how group policies work on the ASA? How does the client know which GP to use?
0
 
LVL 12

Expert Comment

by:Pugglewuggle
ID: 22782198
With SSL VPN, the use of group policies is very limited compared to IPsec (which is why I still use IPsec). With SSL VPN, users all use the default group policy.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco ASA 5506 5 70
Shoretel SIP Trunks failing to work after migrating internet/firewall 10 89
RDP Sonicwall 8 88
Setting up a VPN 60 179
In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
I recently had the displeasure of buying a new firewall at one of the buildings I play Sys Admin at. I had to get a better firewall than the cheap one that I had there since I was reconnecting the main office to the satellite office via point-to-poi…
Established in 1997, Technology Architects has become one of the most reputable technology solutions companies in the country. TA have been providing businesses with cost effective state-of-the-art solutions and unparalleled service that is designed…
The Email Laundry PDF encryption service allows companies to send confidential encrypted  emails to anybody. The PDF document can also contain attachments that are embedded in the encrypted PDF. The password is randomly generated by The Email Laundr…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question