Solved

How to push a ghost image to a newly built raid 1 system?

Posted on 2008-10-08
3
1,177 Views
Last Modified: 2013-12-02
I been tasked with a project to build a  new VM system. Well I have built a Raid1 system, and I am trying to push a ghost image to the raid setup. I have tried a couple different ways to get the image to the system via ghost server, and ghost console. Neither works same error message ( Abort: 507, ghostcast session setup failed with ghostcode 19903). I resarched the error, lead to a deadend. Is there any way to get the image to the system? Thanks

P.S-There is no O.S install on the raid, also tried partitioning raid as well.
0
Comment
Question by:TMPSupport
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 63

Accepted Solution

by:
SysExpert earned 500 total points
ID: 22673577
Create a bootable cD with a mapped network drive to the image and the GHOST DOS program

The Universal TCP/IP Network Bootdisk is a DOS
http://www.netbootdisk.com/

Universal Ghost boot CD

http://www.webs05.com/2007/10/16/how-to-create-a-ghost-boot-cd.html

I hope this helps !
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

A quick step-by-step overview of installing and configuring Carbonite Server Backup.
By default, Carbonite Server Backup manages your encryption key for you using Advanced Encryption Standard (AES) 128-bit encryption. If you choose to manage your private encryption key, your backups will be encrypted using AES 256-bit encryption.
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question