Solved

Pokey server 2008 on VM

Posted on 2008-10-08
2
296 Views
Last Modified: 2010-04-19
Hello.  I have a super nice 4 core, 12G HP DL380 server with VMWare 3.51 loaded on it.  I have 3 virtual machines.  Two were cloned and working fine, the one I'm having issues with is a new Server 2008 build.  The box is not tasked acording to the VM tools.  When I click on something I have to wait a full 45 seconds or more before it jumps.  Where do I look to improve performance?
0
Comment
Question by:iisdadmin
2 Comments
 
LVL 3

Expert Comment

by:bertgeysels
ID: 22677548
look at the preformances of your ESX
look at the performance monitor in windows on your VM
check event log of w2008 for errors
0
 

Accepted Solution

by:
iisdadmin earned 0 total points
ID: 22778100
Turned out to be a double solution.  The VM was using a different network card.  I changed the network card and that took care of half the problem.  Pings from the VM to server 1 were 1MS constant.  Pings from server 1 to VM were between 19-22MS constant.  Turned out to be Symantecs Network Threat Protection.  When NTP was disabled the VM was quick like it is supposed to be.  
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this step by step tutorial with screenshots, we will show you HOW TO: Enable SSH Remote Access on a VMware vSphere Hypervisor 6.5 (ESXi 6.5). This is important if you need to enable SSH remote access for additional troubleshooting of the ESXi hos…
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles to another domain controller. Log onto the new domain controller with a user account t…
This Micro Tutorial steps you through the configuration steps to configure your ESXi host Management Network settings and test the management network, ensure the host is recognized by the DNS Server, configure a new password, and the troubleshooting…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question